SimpleAgentPro Build Notes

These notes describe the minor fixes and enhancements made to SimpleAgentPro.

  • SimpleAgentPro Ver 26.0 (Build 1)
    July 29, 2022

    • New release

  • SimpleAgentPro Ver 25.5 (Build 1)
    December 14, 2021

    • New release

  • SimpleAgentPro Ver 25.0 (Build 2)
    August 16, 2021

    • Fixes and Enhancements for
      • SNMP udp forwarding with mtusize support.
      • Fix in wild card matching for config score and addition of clear, reset, set, read, write cfg score Tcl commands.
      • Fix in sapt2tel to ignore first line in response if same as command.
      • Fix to ncdconv to output correct string when not mapping IP address.
      • Support for mapping IP address in netconf proxy response forwarding.
      • Fixed netconf locking issue.

  • SimpleAgentPro Ver 25.0 (Build 1)
    July 27, 2021

    • New release

  • SimpleAgentPro Ver 24.5 (Build 2)
    January 22, 2021

    • The saptclsh utility was built without including X libraries.
    • Fix for Netconf Device Learning Dialog box is included.

  • SimpleAgentPro Ver 24.5 (Build 1)
    December 17, 2020

    • New release

  • SimpleAgentPro Ver 24.0 (Build 1)
    July 8, 2020

    • New release

  • SimpleAgentPro Ver 23.5 (Build 1)
    December 18, 2019

    • New release

  • SimpleAgentPro Ver 23.0 (Build 1)
    July 24, 2019

    • New release

  • SimpleAgentPro Ver 22.5 (Build 1)
    December 14, 2018

    • New release

  • SimpleAgentPro Ver 22.0 (Build 1)
    July 18, 2018

    • New release

  • SimpleAgentPro Ver 21.5 (Build 1)
    December 18, 2017

    • New release

  • SimpleAgentPro Ver 21.0 (Build 1)
    July 18, 2017

    • New release

  • SimpleAgentPro Ver 20.5 (Build 1)
    December 15, 2016

    • New release
  • SimpleAgentPro Ver 20.0 (Build 1)
    June 15, 2016

    • New release
  • SimpleAgentPro Ver 19.5 (Build 1)
    December 15, 2015

    • New release
  • SimpleAgentPro Ver 19.0 (Build 1)
    June 30, 2015

    • New release
  • SimpleAgentPro Ver 18.5 (Build 1)
    December 16, 2014

    • New release
  • SimpleAgentPro Ver 18.0 (Build 1)
    July 15, 2014

    • New release
  • SimpleAgentPro Ver 16.5 (Build 1)
    Dec 11, 2012

    • New release
  • SimpleAgentPro Ver 16.0 (Build 1)
    May 30, 2012

    • New release
  • SimpleAgentPro Ver 15.5 (Build 1)
    Novemeber 14, 2011

    • New release
  • SimpleAgentPro Ver 15.0 (Build 1)
    April 12, 2011

    • New release
  • SimpleAgentPro Ver 14.0 (Build 1)
    March 22, 2010

    • New release
  • SimpleAgentPro Ver 12.5 (Build 2)
    Sept 3, 2009

    • Fixes and Enhancements for
      • tcl script sent to a device that had not fully started.
      • valuelistinonefile handling
      • SA_setvar for variables without range specified
      • token replacement for $$MYTOKENSnnn$$
      • topology editor creating loops
      • sapvfilter with device library installed
      • saving of last used map, workspace, view
      • refesh of maps
      • drag and drop of folder onto itself
      • statistics toolbar
  • SimpleAgentPro Ver 12.5 (Build 1)
    Aug 6, 2009

    • New release
  • SimpleAgentPro Ver 12.0 (Build 1)
    Jan 23, 2009

    • New release
  • SimpleAgentPro Ver 11.5 (Build 1)
    July 10, 2008

    • New release
  • SimpleAgentPro Ver 11.0 (Build 1)
    January 18, 2008

    • New release
  • SimpleAgentPro Ver 10.5 (Build 2)
    September 7, 2007

    • Added Tcl command to get the map name.
    • MIB Compiler does not complain about lack of INTEGER size constraints in SNMPv2 SMI
    • Fonts updated for saptopo
    • Icons updated for Solaris
    • GUI usability fixes in trap generation and editing of modeling files.
  • SimpleAgentPro Ver 10.5 (Build 1)
    June 12, 2007

    • New release
  • SimpleAgentPro Ver 10.0 (Build 1)
    November 14, 2006

    • New release
  • SimpleAgentPro Ver 9.5 (Build 2)
    May 12, 2006

    • Fixed mibcompiler sensitivity to lack of spaces in BEGIN clause.
    • Max pdu length set correctly in SNMPv3 header as per user setting.
    • Fixed sapcnsl duplicates/errors when doing mutliple "adddev" and doing "startdev" on nonexistent devices.
    • Added additional information in sapns usage message.
    • Disallowed .cva file from being edited by var file editor.
    • Added checking for OID variables having invalid randomup valuetypes.
  • SimpleAgentPro Ver 9.5 (Build 1)
    April 17, 2006

    • New release
  • SimpleAgentPro Ver 9.0 (Build 2)
    October 5, 2005

    • Fixed problem where var files were getting created in the bin directory and not in the var directory.
    • Fixed problem where multiple SA_setvaltype commands would not take effect for values with fixed value type.
    • Fixed format of sacmd and sacmd2 in Solaris version.
    • Fixed mib compiler issues with moudle list empty type of errors.
    • Fixed problem with incorrect hostid being displayed in Linux version.
    • Enhanced sapwalk2 to restrict number of variables learnt and added support for list of oids to be excluded.
    • Added support for CA Spectrum integration.
  • SimpleAgentPro Ver 9.0 (Build 1)
    July 15, 2005

    • New release
  • SimpleAgentPro Ver 8.5 (Build 2)
    November 3, 2004

    • Windows version includes new sentinel drivers that should be used on Windows 2003.
    • Mapping of embedded $$MYIPADDRESS$$ where it is in the middle of an oid was fixed. This was preventing some devices in the device library from getting loaded.
  • SimpleAgentPro Ver 8.5 (Build 1)
    October 15, 2004

    • New release
  • SimpleAgentPro Ver 8.0 (Build 1)
    March 9, 2004

    • Added support for %DEFVAL in default rules file.
    • Added support for using maxval if minval is 0 in case of enums.
    • Fixed telnet eol issue with UNIX and Linux telnet clients.
    • Fixed multiple mytoken substitution problem for tables.